•Dynamic — Assigns a port to a VLAN based on the host source MAC address connected to the port.
–Checked — The port may be registered in a dynamic VLAN.
–Unchecked — The port is not allowed to register in a dynamic VLAN.
•PVID
VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped.
•Frame Type — Packet type accepted on the port. Possible values are:
–Admit Tag Only — Only tagged packets are accepted on the port.
–Admit All — Both tagged and untagged packets are accepted on the port.
•Ingress Filtering — Ingress filtering discards packets that are destined to VLANs of which the specific port is not a member.
–Enable — Ingress filtering is activated on the port.
–Disable — Ingress filtering is not activated on the port.
•Current Reserved VLAN — The VLAN currently designated by the system as the reserved VLAN.
•Reserve VLAN for Internal Use — The VLAN selected by the user to be the reserved VLAN if not in use by the system.
Assigning Port Settings
1Open the VLAN Port Settings page.
2Select the port to which settings need to be assigned from the Port
3Complete the remaining fields on the page
4Click Apply Changes.
The VLAN port settings are defined, and the device is updated.
358
