Dell 3548 manual Add Host Name Mapping

When defining a new host name mapping, the following additional parameters are available:

•Supported IP Format — Specifies the IP format supported by the host. The possible values are:

–IPv6 — IP version 6 is supported.

–IPv4 — IP version 4 is supported.

•IPv6 Address Type — When the host supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are:

–Link Local — A Link Local address that is non-routable and used for communication on the same network only.

–Global — A globally unique IPv6 address; visible and reachable from different subnets.

•Link Local Interface — When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are:

–VLAN1 — The IPv6 interface is configured on VLAN1.

–ISATAP — The IPv6 interface is configured on ISATAP tunnel.

Adding Host Domain Names

1Open the Host Name Mapping page.

2Click Add.

The Add Host Name Mapping page opens.

Figure 6-48. Add Host Name Mapping

3Define the relevant fields.

4Click Apply Changes.

The IP address is mapped to the Host Name, and the device is updated.

160

Configuring System Information