Installing the PowerConnect 3524/P and PowerConnect 3548/P
Site Preparation
The Dell™ PowerConnect™ 3524 /P and PowerConnect 3548/P devices can be mounted in a standard
•Power — The unit is installed near an easily accessible
•General — The Redundant Power Supply (RPS) is correctly installed by checking that the LEDs on the front panel are illuminated.
•PoE Models — The RPS is currently installed by checking that the PoE LEDs on the front panel are illuminated.
•Clearance — There is adequate frontal clearance for operator access. Allow clearance for cabling, power connections, and ventilation.
•Cabling — The cabling is routed to avoid sources of electrical noise such as radio transmitters, broadcast amplifiers, power lines, and fluorescent lighting fixtures.
•Ambient Requirements — The ambient unit operating temperature range is 0 to 45ºC (32 to 113ºF) at a relative humidity of 10% to 90%,
Unpacking
Package Contents
While unpacking the device, ensure that the following items are included:
•Device/Switch
•AC power cable
•
•
Installing the PowerConnect 3524/P and PowerConnect 3548/P
39
