The IP Interface Parameters page contains the following parameters:
•IP Address — The interface IP address.
•Prefix Length — The number of bits that comprise the IP address prefix.
•Interface — The interface type for which the IP address is defined. Select Port, LAG, or VLAN.
•Type — Indicates whether or not the IP address was configured statically.
•Remove — Removes the interface from the IP Address
–Checked — Removes the selected interface.
–Unchecked — Maintains the selected interface.
Adding an IPv4 IP Interface
1Open the IPv4 Interface Parameters page.
2Click Add.
The Add a Static IPv4 Interface page opens.
Figure 6-28. Add a Static IPv4 Interface
In addition to the parameters on the IP Interface Parameters page, the Add a Static IP Interface page contains the following parameter:
•Network Mask — Indicates the subnetwork mask of the IP address.
3Complete the fields on the page.
4Click Apply Changes.
The new IP address is added to the interface, and the device is updated.
Modifying IPv4 Address Parameters
1Open the IPv4 Interface Parameters page.
2Select an IP address in the IP Address
132
