The File Download from Server page contains the following fields:
•Supported IP Format — Specifies the IP format supported by the server. The possible values are:
–IPv6 — IP version 6 is supported.
–IPv4 — IP version 4 is supported.
•IPv6 Address Type — When the server supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are:
–Link Local — A Link Local address that is
–Global — A globally unique IPv6 address; visible and reachable from different subnets.
•Link Local Interface — When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are:
–VLAN1 — The IPv6 interface is configured on VLAN1.
–ISATAP — The IPv6 interface is configured on ISATAP tunnel.
•Firmware Download — The Firmware file is downloaded. If Firmware Download is selected, the Configuration Download fields are grayed out.
•Configuration Download — The Configuration file is downloaded. If Configuration Download is selected, the Firmware Download fields are grayed out.
•Download via TFTP — Enables initiating an image upload via the TFTP server.
•Download via HTTP — Enables initiating an image upload via the HTTP server.
Firmware Download
•Server IP Address — The Server IP Address from which the firmware files are downloaded.
•Source File Name
•Destination File Name — The destination file type to which the file is downloaded. The possible field values are:
–Software Image — Downloads the Image file. The image file overwrites the
–Boot Code — Downloads the Boot file.
248
