4Select the Remove check box.
5Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in theTACACS+ Settings page.
Table
CLI Command | Description | |
|
| |
Indicates a TACACS+ host. | ||
name} |
| |
number] [timeout timeout] [key key- |
| |
string] [source source] [priority priority] |
| |
|
| |
| Indicates the authentication and encryption key | |
for all TACACS+ communications between the | ||
| ||
| device and the TACACS+ server. This key must | |
| match the encryption used on the TACACS+ | |
| daemon. (Range: 0 - 128 characters.) | |
|
| |
Indicates the timeout value in seconds. (Range: 1 | ||
| - 30.) | |
|
| |
Indicates the source IP address. (Range: Valid | ||
| IP Address.) | |
|
| |
show tacacs | Displays configuration and statistics for a | |
| TACACS+ server. | |
|
|