console(config-line)#enable authentication default

console(config-line)# password bob

When initially logging onto a device through a Telnet session, enter bob at the password prompt.

When changing a device mode to enable, enter bob.

Configuring an Initial SSH password

To configure an initial SSH password, enter the following commands:

console(config)# aaa authentication login default line console(config)# aaa authentication enable default line console(config)# line ssh

console(config-line)#login authentication default console(config-line)#enable authentication default console(config-line)#password jones.

When initially logging onto a device through a SSH session, enter jones at the password prompt.

When changing a device’s mode to enable, enter jones.

Configuring an Initial HTTP Password

To configure an initial HTTP password, enter the following commands:

console(config)# ip http authentication local

console(config)# username admin password user1 level 15

Configuring an initial HTTPS password

To configure an initial HTTPS password, enter the following commands:

console(config)# ip https authentication local console(config)# username admin password user1 level 15

Enter the following commands once when configuring to use a terminal, a Telnet, or an SSH session in order to use an HTTPS session.

NOTE: In the Web browser enable SSL 2.0 or greater for the page content to be displayed.

console(config)# crypto certificate generate key_generate

console(config)# ip https server

When initially enabling an http or https session, enter admin for user name and user1 for password.

NOTE: Http and Https services require level 15 access and connect directly to the configuration level access.

58

Configuring PowerConnect 3524/P and 3548/P

Page 58
Image 58
Dell 3548 manual Consoleconfig-line#enable authentication default, Consoleconfig# ip http authentication local