![](/images/new-backgrounds/1192278/192278479x1.webp)
Removing a Filter
1Open the Notification Filter page.
2Click Show All.
The Filter Table opens.
3Select a Filter Table entry.
4Check the Remove checkbox.
The filter entry is deleted, and the device is updated.
Configuring Notification Filters Using CLI Commands
The following table summarizes equivalent CLI commands for defining fields displayed in the Notification Filter page.
Table
CLI Command | Description |
show snmp filters [filtername] Displays the configuration of SNMP notification filters
The following is an example of CLI commands:
Console (config)#
Console # show snmp filters
Name | OID | Tree | Type |
user1 | iso |
| Included |
Defining SNMP Notification Recipients
The Notification Recipients page contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
•Identifying Management Trap Targets
•Trap Filtering
•Selecting Trap Generation Parameters
•Providing Access Control Checks
240