Mapping a DSCP Value and Assigning a Priority Queue

1Open the DSCP to Queue page.

2Select a value in the DSCP In column.

3Define the Queue field.

4Click Apply Changes.

The DSCP is overwritten, and the value is assigned an egress queue.

Assigning DSCP Values Using the CLI Commands

The following table summarizes the equivalent CLI commands for configuring fields in the DSCP to Queue page.

Table 9-7. DSCP Value to Queue CLI Commands

CLI Command

Description

qos map dscp-queue dscp-list Modifies the DSCP to queue mapping. to queue-id

The following is an example of the CLI commands:

console(config)# qos map dscp-queue 33 40 41 to 1

Configuring Quality of Service

451

Page 451
Image 451
Dell 3548 manual Consoleconfig# qos map dscp-queue 33 40 41 to