Dell 3548 manual Configuring System Information

SNMPv1,2

SNMP versions 1 and 2 are enabled for the selected recipient. Define the following fields for SNMPv1 and SNMPv2:

•Community String (1-20 Characters) — Identifies the community string of the trap manager.

•Notification Version — Determines the trap type. The possible field values are:

–SNMP V1 — SNMP Version 1 traps are sent.

–SNMP V2 — SNMP Version 2 traps are sent.

SNMPv3

SNMPv3 is used to send and receive traps. Define the following fields for SNMPv3:

•User Name — The user to whom SNMP notifications are sent.

•Security Level — Defines the means by which the packet is authenticated. The possible field values are:

–No Authentication — The packet is neither authenticated nor encrypted.

–Authentication — The packet is authenticated.

–Privacy — The packet is both authenticated and encrypted.

•UDP Port (1-65535) — The UDP port used to send notifications. The default is 162.

•Filter Name — Includes or excludes SNMP filters.

–Checked — Includes SNMP filters.

–Unchecked — Excludes SNMP filters.

•Timeout (1-300) — The amount of time (seconds) the device waits before resending informs. The default is 15 seconds.

•Retries (1-255) — The amount of times the device resends an inform request. The default is 3.

•Remove Notification Recipient — Removes selected notification recipients.

–Checked — Removes the specific notification recipient.

–Unchecked — Maintains the notification recipient.

When adding a Notification Recipient, the following additional parameters are available:

•Supported IP Format — Specifies the IP format supported by the recipient. The possible values are:

–IPv6 — IP version 6 is supported.

–IPv4 — IP version 4 is supported.

242

Configuring System Information