
The Voice VLAN Port Setting Table includes the Membership field which indicates if the Voice VLAN member is a static or dynamic member. The field value Dynamic indicates the VLAN membership was dynamically created through GARP. The field value Static indicates the VLAN membership is
3Select the unit number.
4Modify the fields as desired.
5Click Apply Changes.
Defining Voice VLAN Port Settings Using CLI Commands
The following table summarizes the equivalent CLI command for defining Voice VLAN port settings.
Table
CLI Command | Description |
|
|
voice vlan secure | Use the voice vlan secure interface configuration command to configure the secure mode |
no voice vlan secure | for the voice VLAN. Use the no form of this command to disable the secure mode. |
| |
|
|
Defining OUIs
The Voice VLAN OUI page lists the Organizationally Unique Identifiers (OUIs) associated with the Voice VLAN. The first three bytes of the MAC Address contain a manufacturer identifier. While the last three bytes contain a unique station ID. Using the OUI, network managers can add specific manufacturer’s MAC addresses to the OUI table. Once the OUIs are added, all traffic received on the Voice VLAN ports from the specific IP phone with a listed OUI, is forwarded on the voice VLAN.
To open the Voice VLAN OUI page, click Switch→ Voice VLAN → OUI in the tree view.
Configuring Switch Information
379