Dell 3548 manual 176

Defining Access Profiles Using CLI Commands

The following table summarizes the equivalent CLI commands for setting fields displayed in the Access Profiles page.

Table 6-33. Access Profiles CLI Commands

CLI Command	Description
management access-list name	Defines an access-list for management, and enters
	the access-list context for configuration.

permit [ethernet interface-number vlan vlan-id port-channel number] [service service]

Sets port permitting conditions for the management access list.

permit ip-source {ipv4-address ipv6- address / prefix-length} [mask mask prefix-length] [ethernet interface- number vlan vlan-id port-channel number] [service service]

Sets port permitting conditions for the management access list, and the selected management method.

deny [ethernet interface-number vlan	Sets port denying conditions for the management
vlan-id port-channel number] [service	access list, and the selected management method.
service]
deny ip-source {ipv4-address ipv6-	Sets port denying conditions for the management
address / prefix-length} [mask mask	access list, and the selected management method.
prefix-length] [ethernet interface-
number vlan vlan-id port-channel
number] [service service]
management access-class {console-only	Defines which access-list is used as the active
name}	management connections.
show management access-list [name]	Displays the active management access-lists.
show management access-class	Displays information about management access-
	class.

176

Configuring System Information