Queue Settings
•Strict Priority — Indicates the system queues are SP queues, when selected.
•WRR — Indicates the system queues are WRR queues, when selected.
Enabling Quality of Service:
1Open the Global Settings page.
2Select Enable in the Quality of Service field.
3Click Apply Changes.
Class of Service is enabled on the device.
Enabling the Trust Mode:
1Open the Global Settings page.
2Define the Trust Mode field.
3Click Apply Changes.
Trust mode is enabled on the device.
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Global Settings page.
Table
CLI Command | Description |
|
|
qos trust [cos dscp] | Configures the system to trust mode. |
|
|
no qos trust | Returns to the |
|
|
The following is an example of the CLI commands:
console(config)# qos trust dscp
This section contians the following topics:
•"Defining QoS Interface Settings" on page 445
•"Defining Bandwidth Settings" on page 446
•"Mapping CoS Values to Queues" on page 448
•"Mapping DSCP Values to Queues" on page 450
444
Configuring Quality of Service
