Dell 3548 manual Console# show spanning-tree ethernet 1/e15 instance

The following is an example of the CLI commands:

console> enable

console# configure

Console(config)# interface ethernet 1/e1

Console(config-if)# spanning-tree disable

Console(config-if)# spanning-tree cost 35000

Console(config-if)# spanning-tree port-priority 96

Console(config-if)# spanning-tree portfast

Console(config-if)# exit

Console(config)# exit

Console# show spanning-tree ethernet 1/e15

Port 1/e15 enabled

State: forwarding	Role: designated
Port id: 128.15	Port cost: 19
Type: P2p (configured: Auto) Internal Port Fast: No (configured: No)
Designated bridge Priority : 32768	Address: 00:00:00:16:00:64
Designated port id: 128.15	Designated path cost: 4
Guard root: Disabled
Number of transitions to forwarding state: 2
BPDU: sent 483, received 1037
console# show spanning-tree ethernet 1/e15 instance 12
Port 1/e15 enabled
State: discarding	Role: alternate
Port id: 128.15	Port cost: 19
Type: P2p (configured: Auto) Internal Port Fast: No (configured:
No)
Designated bridge Priority : 32768	Address: 00:00:b0:07:07:49
Designated port id: 128.11	Designated path cost: 0

Guard root: Disabled

Number of transitions to forwarding state: 3

BPDU: sent 482, received 1035

Configuring Switch Information

335