Gigabit Port LEDs

The RJ-45 LED indications for PowerConnect 3524P and PowerConnect 3548P are described in the following table:

Table 2-2. PowerConnect 3524P and PowerConnect 3548P RJ-45 Copper based 100BaseT LED Indications

LED	Color	Description

Speed/Link/Act	Green Static	The port is currently linked at 100 Mbps.
	Green Flashing	The ports is currently operating at 100 Mbps.
	OFF	The port is currently operating at 10 Mbps or is not linked.

FDX	Green Static	The Powered Device (PD) is detected and is operating at normal load. For more
		information about Powered Devices, see "Managing Power over Ethernet".
	Green Flashing	The port is operating at transitional mode. The PD is being detected, or is faulty.
		For more information about Power over Ethernet, see "Managing Power over
		Ethernet".
	Amber Static	An overload or short has occurred on the Powered Device. For more information
		about Power over Ethernet faults, see "Managing Power over Ethernet".
	Amber	The powered device power conception exceeds the predefined power allotment.
	Flashing	For more information about Power over Ethernet power allotments, see
		"Managing Power over Ethernet".
	OFF	No powered device is detected.

The following table describes the Gigabit (stacking port) LEDs:

Table 2-3. PowerConnect 3524 and PowerConnect 3548 RJ-45 Copper based 100BaseT LED Indications

LED	Color	Description

Link/Activity/Speed	Green Static	The port is running at 1000 Mbs.
	Green Flashing	The port is either transmitting or receiving data at 1000 Mbps.
	Yellow Static	The port is running at 10 or 100Mbs.
	Yellow Flashing	The port is either transmitting or receiving data at 10 or 100 Mbps.
	OFF	The port is currently not operating.

FDX	Green Static	The port is currently operating in Full Duplex mode.
	OFF	The port is currently operating in Half Duplex mode.

Hardware Description