Configuring DHCP Snooping Trusted Interfaces with CLI Commands
The following table summarizes the equivalent CLI commands for configuring DHCP Snooping Trusted Interfaces.
Table
CLI Command | Description |
ip dhcp snooping trust Use the ip dhcp snooping trust interface configuration command to configure a
no ip dhcp snooping trust port as trusted for DHCP snooping purposes. Use the no form of this command to return to the default setting.
Adding Interfaces to the DHCP Snooping Database
The DHCP Snooping Binding Database page contains parameters for querying and adding IP addresses to the DHCP Snooping Database.
To open the Binding Database page, click Switch→ DHCP Snooping → Binding Database
Figure 7-19. Binding Database
294
