Add an Access Control Group

•Security Level — The security level attached to the group. Security levels apply to SNMPv3 only. The possible field values are:

–No Authentication — Neither the Authentication nor the Privacy security levels are assigned to the group.

–Authentication — Authenticates SNMP messages, and ensures the SNMP messages origin is authenticated.

–Privacy — Encrypts SNMP message.

•Operation — Defines the group access rights. The possible field values are:

–Read — The management access is restricted to read-only, and changes cannot be made to the assigned SNMP view.

–Write — The management access is read-write and changes can be made to the assigned SNMP view.

–Notify — Sends traps for the assigned SNMP view.

Defining SNMP Groups

1Open the Access Control Group page.

2Click Add.

The Add an Access Control Group page opens.

Figure 6-92. Add an Access Control Group

3Define the fields in the Add an Access Control Group page.

4Click Apply Changes.

The group is added, and the device is updated.

228