Dell 3548 manual Console# show snmp users

Deleting an User Security Model Table Entry

1Open the SNMPv3 User Security Model (USM) page.

2Click Show All.

The User Security Model Table opens.

3Select a User Security Model Table entry.

4Check the Remove checkbox.

5Click Apply Changes.

The User Security Model Table entry is deleted, and the device is updated.

Defining SNMPv3 Users Using CLI Commands

The following table summarizes the equivalent CLI commands for defining fields displayed in the SNMPv3 User Security Model (USM) page.

Table 6-49. SNMPv3 User CLI Commands

CLI Command	Description
snmp-server user username groupname	Configures a new SNMP V3 user.
[remote engineid-string][auth-md5
password auth-shapassword auth-
md5-key md5-des-key auth-sha-key
sha-des-key]
show snmp users [username]	Displays the configuration of users.

The following is an example of the CLI commands:

console (config)# snmp-server user John user-group auth-md51234

console (config)# end
console# show snmp users
Name	Group Name	Auth Method	Remote
-------	----------	-----------	------
John	user-group	md5

Configuring System Information

233