Dell MD3200, MD3220 owner manual Installing a Hard-Drive Blank, Removing a Hard Drive, 204

Figure 15-3. Removing and Installing a 2.5" Hard-Drive Blank (MD3220 Only)

	1	2
1	hard-drive blank	2	release tab

Installing a Hard-Drive Blank

1If installed, remove the front bezel. See "Removing the Front Bezel" on page 202.

2Insert the hard-drive blank into the drive bay until the blank is fully seated.

3Close the handle to lock the blank in place.

4If applicable, replace the front bezel. See "Installing the Front Bezel" on page 202.

Removing a Hard Drive

CAUTION: Many repairs may only be done by a certified service technician. You must only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1If installed, remove the front bezel. See "Removing the Front Bezel" on page 202.

204

Management: Installing Array Components