Dell MD3220, MD3200 owner manual Changing the Virtual Disk Cache Settings, 101

To change the virtual disk modification priority:

1In the AMW, select the Logical tab.

2Select a virtual disk.

3In the toolbar, select Virtual Disk→ Change→ Modification Priority. The Change Modification Priority window is displayed.

4Select one or more virtual disks.

To select nonadjacent virtual disks, press <Ctrl> click. To select adjacent virtual disks, press <Shift> click. To select all of the available virtual disks, click Select All. Move the Select modification priority slider bar to the desired priority.

5Click OK.

A message prompts you to confirm the change in the virtual disk modification priority.

6Click Yes.

7Click OK.

Changing the Virtual Disk Cache Settings

You can specify the cache memory settings for a single virtual disk or for multiple virtual disks on a storage array.

Guidelines to change cache settings for a virtual disk:

•After opening the Change Cache Settings dialog, the system may prompt you that the RAID controller module has temporarily suspended caching operations. This action may occur when a new battery is charging, when a RAID controller module is removed, or if a mismatch in cache sizes is detected by the RAID controller module. After the condition is cleared, the cache properties selected in the dialog become active. If the selected cache properties do not become active, contact your Technical Support representative.

•If you select more than one virtual disk, the cache settings default to no settings selected. The current cache settings are displayed only if you select a single virtual disk.

•If you change the cache settings by using this option, the priority of all of the virtual disks that you selected is modified.

Configuration: Disk Groups and Virtual Disks

101