Dell MD3200, MD3220 owner manual 120

1In the AMW, select the Mappings tab.

2In the Topology pane, select:

•Default Group

•Undefined mappings node

•Individual defined mapping

•Host group

•Host

3In the toolbar, select Mappings→ Define→ Additional Mapping. The Define Additional Mapping window is displayed.

4In Host group or host, select the appropriate host group or host.

All defined hosts, host groups, and the default group are displayed in the list.

NOTE: When configuring an iSCSI storage array, including the MD3200 or MD3220, if a host or a host group is selected that does not have a SAS host bus adapter (SAS HBA) host port defined, a warning dialog is displayed.

5In Logical unit number, select a LUN. The supported LUNs are 0 through 255.

6Select the virtual disk to be mapped in the Virtual Disk area.

The Virtual Disk area lists the names and capacity of the virtual disks that are available for mapping based on the selected host group or selected host.

7Click Add.

NOTE: The Add button is inactive until a host group or host, LUN, and virtual disk are selected.

8To define additional mappings, repeat step 4 through step 7.

NOTE: After a virtual disk is mapped, it is no longer available in the Virtual Disk area.

9Click Close.

The mappings are saved. The Topology pane and the Defined Mappings pane in the Mappings tab are updated to reflect the mappings.

120

Configuration: Disk Groups and Virtual Disks