Dell MD3200, MD3220 On the Setup tab, select Manage a Storage Array, 230, Status Icon Description

To launch the AMW, perform one of these actions:

•On the Devices tab, in either the Tree view or the Table view, double-click a storage array. Alternatively, you can right-click a storage array and select Manage Storage Array from the pop-up menu.

•On the Setup tab, select Manage a Storage Array.

After the AMW is displayed, select the Physical tab to see the components in the storage array. A component that has a problem is indicated by a status icon.

The status icons indicate the status of the components that comprise the storage array. Also, the Recovery Guru option provides a detailed explanation of the conditions and the applicable steps to remedy any Needs Attention status. For more information, see "Recovery Guru" on page 235.

For the status of a storage array, the icons shown in the following table are used in the Tree view, the Table view, and both the EMW Status Bar and the AMW Status Bar.

Table 18-2. Status Icon

Status	Icon	Description
Optimal		Each component in the managed storage array is in
		the desired working condition.
Needs Attention		There is a problem with the managed storage array
		that requires your intervention to correct it.
Unresponsive		The storage management station cannot
		communicate with the storage array or one RAID
		controller module or both RAID controller modules
		in the storage array.
Fixing Status		A Needs Attention status is corrected and the
		managed storage array is currently transitioning to an
		Optimal state.
Unsupported		The node is currently not supported by this version of
		MDSM.
Software		The storage array is running a level of software that is
Unsupported		no longer supported by MDSM.

230

Troubleshooting: Your Storage Array Software