Dell MD3200, MD3220 owner manual Configuration About Your Storage Array

6To include the contact information of the sender in the e-mail alert, select Include contact information with the alerts, and type the contact information.

NOTE: Including the contact information in the e-mail alert is optional.

7Select the e-mailtab to configure the e-mail destinations.

•Adding an e-mail address—In e-mail address, type the e-mail address, and click Add.

•Replacing an e-mail address—In the Configured E-mail addresses area, select the e-mail address to be replaced, type the replacement e- mail address in E-mail address, and click Replace.

•Deleting an e-mail address—In the Configured E-mail addresses area, select the e-mail address, and click Delete.

•Validating an e-mail address—Type the e-mail address in Email address or select the e-mail address in the Configured E-mail addresses area, and click Test. A test e-mail is sent to the selected e- mail address. A dialog with the results of the test and any error is displayed.

8For the selected e-mail address, in Information To Send, select:

•Event Only—The alert e-mail contains only the event information. This alert type is the default.

•Event + Profile—The alert e-mail contains the event information and the storage array profile.

•Event + Support—The alert e-mail contains the event information and a compressed file that contains complete support information for the storage array that has generated the alert.

9For the selected e-mail address, in Frequency, select:

•Every event—Sends an alert e-mail whenever an event occurs. This is the default option.

•Every x hours—Sends an alert e-mail after the specified time interval if an event occurred during that time interval. You can select this option only if you have selected either Event + Profile or Event + Support in the Information To Send drop down list.

10Click OK.

78

Configuration: About Your Storage Array