Dell MD3200, MD3220 Installing a RAID Controller Module, Opening the RAID Controller Module, 212

Installing a RAID Controller Module

CAUTION: Many repairs may only be done by a certified service technician. You must only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Insert the RAID controller module into the RAID controller module bay until it seats into place.

2Push the release lever toward the chassis until it clicks into place.

3Connect all the cables to the RAID controller module.

4If applicable, update the firmware for the RAID controller module. For information about the latest firmware, see support.dell.com.

Opening the RAID Controller Module

CAUTION: Many repairs may only be done by a certified service technician. You must only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the array and host server.

2Disconnect all the power cables connected to the array.

3Remove the RAID controller module. See "Removing a RAID Controller Module Blank" on page 209.

4Remove the screws from the sides of the RAID controller module. See Figure 15-9.

5While pressing the indent, slide the cover in the direction of the arrow and lift it away from the RAID controller module. See Figure 15-9.

212

Management: Installing Array Components