3Modify the interface type.
4Click Apply Changes.
The parameters are modified, and the device is updated.
Deleting IPv4 Addresses
1Open the IPv4 Interface Parameters page.
2Click Show All.
The Interface Parameters Table page opens.
Figure 6-29. IPv4 Interface Parameter Table
3Select an IP address and select the Remove check box.
4Click Apply Changes.
The selected IP address is deleted, and the device is updated.
Defining IPv4 Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the IPv4 Interfaces Parameters page.
Table
CLI Command | Description |
ip address
no ip address | Removes an IP address |
show ip interface [ethernet Displays the usability status of interfaces
id
