The CoS to Queue page contains the following fields:
•Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 7 is the highest.
•Queue — The queue to which the CoS priority is mapped. Four traffic priority queues are supported.
•Restore Defaults — Restores the device factory defaults for mapping CoS values to an egress queue.
Mapping a CoS Value to a Queue
1Open the CoS to Queue page.
2Select a CoS entry.
3Define the queue number in the Queue field.
4Click Apply Changes.
The CoS value is mapped to an egress queue, and the device is updated.
Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the CoS to Queue page.
Table
CLI Command | Description |
|
|
Maps assigned CoS values to the egress | |
cos0.cos7 | queues. |
|
|
The following is an example of the CLI commands:
console(config)# wrr-queue cos-map 4 7
Configuring Quality of Service
449
