Defining Device Events Using the CLI Commands
The following table contains the CLI commands for defining device events.
Table
CLI Command | Description |
show rmon log [event] Displays the RMON logging table.
The following is an example of the CLI commands:
console(config)# rmon | event 1 log |
| ||
Console> show rmon log |
|
|
| |
Maximum table size: 500 |
|
| ||
Event Description | Time |
|
| |
1 | Errors | Jan 18 | 2002 | 23:58:17 |
2 | High Broadcast | Jan 18 | 2002 | 23:59:48 |
|
|
|
|
|
Defining RMON Device Alarms
Use the RMON Alarms page to set network alarms. Network alarms occur when a network problem, or event, is detected. Rising and falling thresholds generate events. For more information about events, see "Viewing the RMON Events Log."
To open the RMON Alarms page, click Statistics/RMON→ RMON→ Alarms in the tree view.
Viewing Statistics
431
