Dell 3548 manual From the Startup menu, press 1. The following prompt appears

Ryan board, based on PPC8247

128MByte SDRAM. I-Cache 16 KB. D-Cache 16 KB. Cache Enabled. Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

2When the auto-boot message appears, press <Enter> to get the Startup menu. The Startup menu procedures can be done using the ASCII terminal or Windows HyperTerminal.

[1]Download Software

[2]Erase Flash File

[3]Password Recovery Procedure

[4]Enter Diagnostic Mode

[5]Set Terminal Baud-Rate

[6]Back

The following sections describe the available Startup menu options.

NOTE: When selecting an option from the Startup menu, take time-out into account: if no selection is made within 35 seconds (default), the device times out. This default value can be changed through CLI.

NOTE: Technical support personnel only can operate the Diagnostics Mode (option[4]). For this reason, Enter Diagnostics Mode is not described in this guide.

Download Software - option[1]

The software download procedure is performed when a new version must be downloaded to replace the corrupted files, update or upgrade the system software. To download software from the Startup menu:

1From the Startup menu, press [1]. The following prompt appears:

Downloading code using XMODEM

******************************************************************

***Running SW Ver. 21_08 Date 21-Aug-xxxx Time 17:22:25 ***

******************************************************************

HW version is 00.00.00

Base Mac address is: 00:14:47:78:89:96

Dram size is : 128M bytes

Dram first block size is : 102400K bytes

Dram first PTR is : 0x1800000

Dram second block size is : 4096K bytes

Dram second PTR is : 0x7C00000

60

Configuring PowerConnect 3524/P and 3548/P