Dell 3548 manual Defining Enable Passwords

Assigning Line Passwords Using CLI Commands

The following table summarizes the equivalent CLI commands for setting fields displayed in the Line Password page.

Table 6-39. Line Password CLI Commands

CLI Command	Description
password password	Indicates a password on a line.
[encrypted]

The following is an example of the CLI commands:

console(config-line)# password dell

Defining Enable Passwords

The Enable Password page sets a local password to control access to Normal and Privilege levels.

To open the Enable Password page, click System → Management Security → Enable Passwords in the tree view.

Figure 6-69. Enable Password

The Enable Password page contains the following fields:

•Select Enable Access Level — Access level associated with the enable password. The lowest user access level is 1 and 15 is the highest user access level. Users with access level 15 are Privileged Users, and only they can access and use the OpenManage Switch Administrator.

•Password (0-159 characters) — The password to enable.

194

Configuring System Information