Configuration Download

Server IP Address — The TFTP Server IP Address from which the configuration files are downloaded.

Source File Name (1-64 characters) — Indicates the configuration files to be downloaded.

Destination File — The destination file to which the configuration file is downloaded. The possible field values are:

Running Configuration — Downloads commands into the Running Configuration file.

Startup Configuration — Downloads the Startup Configuration file, and overwrites it.

<filename> — Downloads commands into a configuration backup file. The filename is determined by the user at download.

Downloading Files

1Open the File Download from Server page.

2Define the file type to download.

3Define the fields.

4Click Apply Changes.

The software is downloaded to the device. To activate the selected Image file, reset the device. For information on resetting the device, see Switching Between Stack Masters.

Downloading Files Using CLI Commands

The following table summarizes the equivalent CLI commands for setting fields displayed in the File Download from Server page.

Table 6-53. File Download CLI Commands

CLI Command

Description

copy source-urldestination-urlCopies any file from a source to a destination.

The following is an example of the CLI commands:

console# copy tftp://10.6.6.64/pp.txt startup-config

....!

Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]

01-Jan-2000 06:41:55 %COPY-W-TRAP: The copy operation was completed successfully

NOTE: Each exclamation mark (!) indicates that ten packets were successfully transferred.

Configuring System Information

249

Page 249
Image 249
Dell 3548 manual 249