When defining a new DNS server, the following additional parameters are available:

Supported IP Format — Specifies the IP format supported by the server. The possible values are:

IPv6 — IP version 6 is supported.

IPv4 — IP version 4 is supported.

IPv6 Address Type — When the server supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are:

Link Local — A Link Local address that is non-routable and used for communication on the same network only.

Global — A globally unique IPv6 address; visible and reachable from different subnets.

Link Local Interface — When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are:

VLAN1 — The IPv6 interface is configured on VLAN1.

ISATAP — The IPv6 interface is configured on ISATAP tunnel.

Adding a DNS Server

1Open the Domain Naming System (DNS) page.

2Click Add.

The Add DNS Server page opens.

Figure 6-44. Add DNS Server

In addition to the fields in the Domain Naming System (DNS) page, the Add DNS Server page contains the following field:

DNS Server — DNS Server IP address.

3Define the relevant fields.

4Click Apply Changes.

The new DNS server is defined, and the device is updated.

Configuring System Information

155

Page 155
Image 155
Dell 3548 manual 155