Defining Ports to Receive Multicast Service
1Open the Bridge Multicast Group page.
2Define the VLAN ID and the Bridge Multicast Address fields.
3Toggle a port to S to join the port to the selected Multicast group.
4Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
5Click Apply Changes.
The port is assigned to the Multicast group, and the device is updated.
Assigning LAGs to Receive Multicast Service
1Open the Bridge Multicast Group page.
2Define the VLAN ID and the Bridge Multicast Address fields.
3Toggle the LAG to S to join the LAG to the selected Multicast group.
4Toggle the LAG to F to forbid adding specific Multicast addresses to a specific LAG.
5Click Apply Changes.
The LAG is assigned to the Multicast group, and the device is updated.
Managing Multicast Service Members Using CLI Commands
The following table summarizes the equivalent CLI commands for managing Multicast service members as displayed in the Bridge Multicast Group page.
Table
CLI Command | Description |
|
|
bridge multicast address {mac- | Registers |
addresses to the bridge table, and | |
address} | adds static ports to the group. |
|
|
bridge multicast forbidden address | Forbids adding a specific Multicast |
address to specific ports. Use the no | |
address}[add remove] {ethernet | form of this command to return to |
default | |
| |
|
|
show bridge multicast | Displays Multicast MAC address |
[vlan | table information. |
| |
address}] [format ip mac] |
|
|
|
