3Define the available fields for the relevant LAGs.

4Click Apply Changes.

The LAG parameters are saved to the device.

Configuring LAGs with CLI Commands

The following table summarizes the equivalent CLI commands for configuring LAGs as displayed in the Ports - LAG Configuration page.

Table 7-13. LAG Configuration CLI Commands

CLI CommandDescription

interface port-channel port-channel-Enters the interface configuration mode of a specific

number

port-channel.

 

 

description string

Adds a description to an interface configuration.

 

 

shutdown

Disables interfaces that are part of the currently set

 

context.

 

 

speed bps

Configures the speed of a given ethernet interface when

 

not using auto negotiation.

 

 

negotiation [capability1

Enables interface speed auto negotiation operation.

[capability2…capability5]

 

 

 

back-pressure

Enables Back Pressure on a given interface.

 

 

flowcontrol {auto on off }

Configures the Flow Control on a given interface.

 

 

show interfaces configuration

Displays the configuration for all configured interfaces.

[ethernet interfaceport-channel

 

port-channel-number]

 

show interfaces status [ethernet Displays the status for all configured interfaces. interface port-channel port-channel-

number]

show interfaces description

Displays the description for all configured interfaces.

[ethernet interface port-channel

 

port-channel-number]

 

show interfaces port-channel [port- Displays Port-channel information (which ports are

channel-number]members of that port-channel, and whether they are currently active or not).

Configuring Switch Information

307

Page 307
Image 307
Dell 3548 manual 307