
Displaying the VLAN LAG Table
1Open the VLAN LAG Settings page.
2Click Show All.
The VLAN LAG Table opens.
Figure 7-51. VLAN LAG Table
3To change LAG settings, modify the fields for any LAGs in the table.
4Click Apply Changes.
The VLAN LAG parameters are defined, and the device is updated.
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to VLAN groups as displayed in the VLAN LAG Settings page.
Table
CLI Command | Description |
|
|
switchport mode {access trunk general} | Configures a LAG VLAN membership mode. |
|
|
switchport trunk native vlan | Defines the port as a member of the specified VLAN, and the |
| VLAN ID as the LAG default VLAN ID (PVID). |
|
|
switchport general pvid | Configure the LAG VLAN ID (PVID) when the interface is in |
| general mode. |
|
|
switchport general allowed vlan add | Adds or removes VLANs from a general LAG. |
[tagged untagged] |
|
|
|
switchport general | Discards untagged packets at ingress. |
| |
|
|
switchport access vlan dynamic | Binds the MAC address to the VLAN. |
|
|
switchport general | Disables LAG ingress filtering. |
|
|