136

Deleting a DHCP IPv4 Interface

1Open the DHCP IPv4 Interface page.

2Click Show All.

The DHCP IPv4 Interface Table opens.

Figure 6-32. DHCP IPv4 Interface Table

3Select a DHCP client entry.

4Select the Remove check box.

5Click Apply Changes.

The selected entry is deleted, and the device is updated.

Defining DHCP IPv4 Interfaces Using CLI Commands

The following table summarizes the equivalent CLI commands for defining DHCP clients.

Table 6-21. DHCP IPv4 Interface CLI Commands

CLI Command	Description

ip address dhcp	To acquire an IP address on an Ethernet interface from the

[hostname host-name]Dynamic Host Configuration Protocol (DHCP).

The following is an example of the CLI command:

console(config)# interface ethernet 1/e11

console(config-if)# ip address dhcp