Dell 3548 manual Console config# snmp-server community dell ro

Deleting Communities

1Open the SNMP Community page.

2Click Show All.

The Community Table page opens.

Figure 6-99. Community Table

3Select a community and check the Remove check box.

4Click Apply Changes.

The community entry is deleted, and the device is updated.

Configuring Communities Using CLI Commands

The following table summarizes the equivalent CLI commands for viewing fields displayed in the SNMP Community.

Table 6-50. SNMP Community CLI Commands

CLI Command	Description
snmp-server community community [ro rw	Sets up the community access string to permit access to the
su] [ipv4-address ipv6-address][view view-	SNMP protocol.
name]
snmp-server community-group community	Sets up community access string to permit limited access to the
group-name[ipv4-address ipv6-address]	SNMP protocol based on group access rights.
show snmp	Displays the current SNMP device configuration.

The following is an example of the CLI commands:

Console (config)# snmp-server community dell ro 10.1.1.1

Configuring System Information

237