
Defining PoE Settings
1Open the Power Over Ethernet page.
2Define the fields.
3Click Apply Changes.
PoE settings are defined, and the device is updated.
Displaying PoE Settings for All Ports
1Open the Power Over Ethernet page.
2Click Show All.
The Power Over Ethernet Table opens.
Figure 6-6. Power Over Ethernet Table
Managing PoE Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed on the Power Over Ethernet page.
Table
CLI Command | Description |
|
|
power inline {auto never} | Configures the administrative mode of the inline power on |
| an interface. |
|
|
power inline | Adds a description of the powered device type. |
|
|
|
|
power inline priority | Configures the priority of the interface from the point of |
{critical high low} | view of inline power management. |
|
|
power inline | Configures the threshold for triggering alarms |
|
|
power inline traps enable | Enables PoE device traps |
|
|
show power inline [ethernet | Displays PoE configuration information |
interface ] |
|
|
|
96