•Designated Port ID — The ID of the selected interface.
•Designated Cost — Cost of the port participating in the STP topology. Ports with a lower cost are less likely to be blocked if STP detects loops.
•Forward Transitions — Number of times the LAG State has changed from the Forwarding state to a Blocking state.
Modifying the LAG STP Parameters
1Open the Spanning Tree LAG Settings page.
2Select a LAG from the Select a LAG
3Modify the fields as desired.
4Click Apply Changes.
The STP LAG parameters are modified, and the device is updated.
Displaying the STP LAG Table
1Open the STP LAG Settings page.
2Click Show All.
The STP LAG Table opens.
