•Interface — Indicates the port or LAG that is being displayed.
•Egress Shaping Rate on Selected Port — Indicates the Egress traffic limit status for the interface.
–Checked — The Egress traffic limit is enabled.
–Not Checked — The Egress traffic limit is disabled.
•Committed Information Rate (CIR) — Defines the Egress CIR traffic limit for the interface.
•Ingress Rate Limit Status — Indicates the Ingress traffic limit status for the interface.
–Checked — The Ingress traffic limit is enabled.
–Not Checked — The Ingress traffic limit is disabled.
•Ingress Rate Limit — Defines the Ingress traffic limit for the interface.
Assigning bandwidth settings for an interface:
1Open the Bandwidth Settings page.
2Select an interface in the Interface field.
3Define the fields.
4Click Apply Changes.
The bandwidth settings are assigned to the interface.
Displaying the Bandwidth Settings Table:
1Open the Bandwidth Settings page.
2Click Show All.
The Bandwidth Settings Table opens.
