Carrier 30XW150-400 specifications Touch Pilot Controller Identification Configuration Table

Table 12 — Touch Pilot Controller Identification Configuration Table

CONTROLLER ID DATA	BLOCK NO.	VALUE AND RANGE	QUALIFIERS
Device Name	1	CHILLDSP	Default
		8 character Name field	Optional
Local address	2	115	Default
Bus number	2	0	Default
Device (driver) type	2	0 = Non-bridge	Default
		3 = Broadcast Acknowledger	Optional
Primary baud rate	3	38400	Default
Secondary baud rate	3	38400	Fixed
Device description	4	Global Chiller Display	Default
		24 character text field	Optional
Device location	4	(Blank)	Default
		24 character text field	Optional
Software part number	4	CESR-131363-01	Fixed
Model number	4	(Blank)	Fixed
Serial number	4	(Blank)	Fixed
Reference number	4	Version 1.0	Fixed
Broadcast address processing list (primary)	5	241-251, 254, 255 enabled	Defaults
		241-255 enabled/disabled	Optional
Broadcast address processing list (secondary)	5	none	Not applicable

Table 13 — Touch Pilot™ User Configuration (USERCONF) Table

DESCRIPTION	LIMITS	UNITS	NAME	DEFAULT
Backlight always on?	No		BACKLITE	No
	Yes
Full access password	0		PSWDFULL	3333
	9999
Limited access password	0		PSWDLMTD	2222
	9999
Active language	0		ACTLANG	0
	1
Time format	0		TIMEFMT	0
	1
Date format	0		DATEFMT	0
	2
Units base	US		UNITBASE	US
	Metric
Contrast control	Manual		CONTRAST	Auto
	Auto
Network mode	0		NETWORK	0
	1
Network settings
Alarm acknowledger	No		ALARMACK	No
	Yes
Broadcast acknowledger	No		BROADACK	No
	Yes
Equipment CCN address
Bus number	0		EQUIPBUS	0
	239
Element number	1		EQUIPELE	1
	239
Control variables
Equipment status (Not Used)	Name		EQSTATUS	NOT USED
	char 8
Equipment start/stop (Not Used)	Name		STARSTOP	NOT USED
	char 8
Alarm status (Not Used)	Name		ALSTATUS	NOT USED
	char 8
Alarm reset (Not Used)	Name		ALRESET	NOT USED
	char 8

BACKLIGHT ALWAYS ON? — This configuration is used to keep the backlight on continuously or to turn it off after 60 seconds with no activity.

Allowable Entries: No/Yes (No=0 or Yes=1)

Default Value: No

FULL ACCESS PASSWORD — This configuration is used to specify the full access password. Refer to Table 1, Setup Menu, for additional information on passwords.

Allowable Entries: 0 through 9999

Default Value: 3333

19