Item Expansion Path Value Mssl, Slva, Llbl

Table 25 — Dual Master Chiller Control Parameters for Parallel Applications with Navigator™ Display

ITEM	ITEM EXPANSION	PATH	VALUE
MSSL	Master/Slave Select	Configuration→ RSET	Master
MSSL	Master/Slave Select	Configuration→ RSET	Default: Disable
			Default: Disable
			Must be set to the Slave Chiller’s address.
SLVA		Configuration→ RSET	The master and slave chiller must have
SLVA	Slave Address	Configuration→ RSET	different addresses and be on the same
			Bus Number
			Default: 2
LLBL	Master Lead Lag Select	Configuration→ RSET	Range: Always Lead, Lag if Fail, Runtime Sel
LLBL	Master Lead Lag Select	Configuration→ RSET	Default: Always Lead
			Default: Always Lead
LLBD	Lead/Lag Balance Delta	Configuration→ RSET	Range: 40 to 400 hours
LLBD	Lead/Lag Balance Delta	Configuration→ RSET	Default: 168 hours
			Default: 168 hours
LLDY	Lag Start Delay	Configuration→ RSET	Range: 2 to 30 minutes
LLDY	Lag Start Delay	Configuration→ RSET	Default: 10 minutes
			Default: 10 minutes
LL.ER	Start If Error Higher	Configuration→ RSET	Range: 3.0 to 18 ΔF (1.7 to 10.0 ΔC)
LL.ER	Start If Error Higher	Configuration→ RSET	Default: 4.0 ΔF (2.2 ΔC)
			Default: 4.0 ΔF (2.2 ΔC)
LAG.M	Lag Unit Pump Select	Configuration→ RSET	Range: Off If U Stp, On If U Stop
LAG.M	Lag Unit Pump Select	Configuration→ RSET	Default: Off If U Stp
			Default: Off If U Stp
LPUL	Lead Pulldown Time	Configuration→ RSET	Range: 0 to 60 minutes
LPUL	Lead Pulldown Time	Configuration→ RSET	Default: 0 minutes
			Default: 0 minutes
SERI	Chillers in Series	Configuration→ RSET	No
SERI	Chillers in Series	Configuration→ RSET	Default: No
			Default: No
OPER	Operating Control Type	Operating Modes→ SLCT	Set to desired control

Table 26 — Dual Slave Chiller Control Parameters for Parallel Applications with Touch Pilot™ Display

DISPLAY NAME	PATH	LINE NO.		VALUE
Master/Slave Select	Main Menu→ Config→ MST_SLV	3	2	(Slave)
			Default: 0 (Disable)

			1	(Local Control)
Master Control Type	Main Menu→ Config→ MST_SLV		2	(Remote Control)
		7	3	(CCN Control)
			Default: 1
			Configure for proper control type.
			Must be set to the Slave Chiller’s address.
Slave Address	Main Menu→ Config→ MST_SLV		The master and slave chiller must have
		11	different addresses and be on the same
			Bus Number
			Default: 2
			0	(Master Always Leads)
Lead Lag Select	Main Menu→ Config→ MST_SLV	12	1	(Lag Once Failed Only)
			2	(Lead/Lag Runtime Select)

			Default: 0 (Master Always Leads)
Lead/Lag Balance Delta	Main Menu→ Config→ MST_SLV	16	Range: 40 to 400 hours
			Default: 168 hours

Lag Start Timer	Main Menu→ Config→ MST_SLV	17	Range: 2 to 30 minutes
			Default: 10 minutes

Lead Pulldown Time	Main Menu→ Config→ MST_SLV	18	Range: 0 to 60 minutes
			Default: 0 minutes

Start If Error Higher	Main Menu→ Config→ MST_SLV	19	Range: 3.0 to 18 ΔF (1.7 to 10.0 ΔC)
			Default: 4.0 ΔF (2.2 ΔC)

Lag Minimum Running Time	Main Menu→ Config→ MST_SLV	20	Range: 0 to 150 minutes
			Default: 0 minutes

Lag Unit Pump Control	Main Menu→ Config→ MST_SLV		0	(Stop If Unit Stops)
		21	1	(Run If Unit Stops)
			Default: 0 (Stop If Unit Stops)
Chiller In Series	Main Menu→ Config→ MST_SLV	22	No
			Default: No

30XW150-400 specifications

The Carrier 30XW150-400 series is a line of water-cooled chillers that exemplifies innovation, efficiency, and reliability in commercial cooling solutions. Designed for medium to large-scale applications, this series is ideal for a variety of settings, including commercial buildings, industrial processes, and chilled water systems.

One of the standout features of the Carrier 30XW series is its efficiency. The chillers utilize advanced variable-speed compressor technology, which allows the units to adapt to varying cooling loads while minimizing energy consumption. This technology not only reduces operational costs but also contributes to better environmental sustainability by lowering greenhouse gas emissions.

The 30XW series chillers are equipped with high-efficiency, scroll compressors that operate quietly and provide significant energy savings. By utilizing enhanced economizer controls, these units can achieve higher efficiency ratings, especially in part-load conditions. The result is an impressive Energy Efficiency Ratio (EER) and Seasonal Energy Efficiency Ratio (SEER), making these units a smart choice for energy-conscious businesses.

In terms of reliability, the Carrier 30XW150-400 series features robust construction and an array of safety and monitoring systems. The units come with advanced diagnostics that help in quickly identifying and addressing any operational issues. This proactive approach ensures reliability and minimizes downtime, which is crucial for maintaining optimal temperature controls in critical environments.

Additionally, the chillers incorporate environmentally friendly refrigerants that comply with the latest regulations, making them a sustainable choice for modern commercial applications. Their compact design allows for flexible installation options, and the integrated control systems provide the ability to optimize performance based on specific building management demands.

User-friendly interfaces and remote monitoring capabilities further enhance the ease of operation, allowing facility managers to have real-time insight into performance metrics and system health. This level of control contributes to better maintenance planning and maximizes the lifespan of the equipment.

In summary, the Carrier 30XW150-400 series of water-cooled chillers combines advanced technology, energy efficiency, and reliable performance, making it an ideal solution for various commercial and industrial cooling needs. With its commitment to innovation and sustainability, Carrier continues to set the standard in the HVAC industry.

Carrier 30XW150-400 Item Expansion Path Value Mssl, Slva, Llbl, Llbd, Lldy, Ll.Er, Lag.M, Lpul

Models: 30XW150-400

ITEM EXPANSION

PATH

VALUE

MSSL

SLVA

LLBL

LLBD

LLDY

LL.ER

LAG.M

LPUL

SERI

DISPLAY NAME

Master Control Type

Slave Address

Lead Lag Select

Lag Unit Pump Control

30XW150-400 specifications