Installation...
Follow the Installation Instructions, making sure the Dishwasher is correctly installed.
When installing the Dishwasher, carry out tasks in the following order:
-choose a location.
-level the appliance (see,“Adjusting the feet”).
-connect to a drainage system.
-connect inlet hose to water supply.
CHOOSE A LOCATION...
The choice of location for your appliance will influence its performance.
●Position where possible on a solid floor. Vibration may occur with a wooden floor.
●Take care with vinyl floor coverings. The weight of the appliance may cause indentations in some vinyl floor coverings.
●For your safety and to comply with IEE regulations, you should not install your appliance in a bath or shower room.
Seek professional advice if you wish to do so.
●Ensure sufficient space is allowed for the appliance.
●Ensure the electrical socket and water taps are easily accessible and that the water supply can be isolated if necessary. Do not use an extension lead or multiple plug for connection to the electrical socket.
●If your dishwasher is underneath a work surface with a hob. You must add thermal insulation to the top of the machine.
ADJUSTING THE FEET...
It is essential that the door is closed and latched before stabilising the dishwasher. Ensure that the rear feet are adjusted so that the product is not sitting on the base of the machine. Adjust either clockwise or
Then adjust either of the two front feet clockwise or
Note: If the appliance is not levelled the door may be off centre and make the machine unstable.
4
