Installation Instructions

ICEMAKER INSTALLATION INSTRUCTIONS K

Are these the right instructions for your model? Follow the Installation Instructions indicated by the label on the back of the refrigerator— C or K

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

CAUTION – Unplug the

Refrigerator. To eliminate the danger of electric shock during installation, you must unplug the refrigerator from its electrical outlet.

TOOLS YOU WILL NEED

Flat blade and Phillips

Pliers

Sharp knife

screwdrivers

 

 

 

 

3

INSTALL FILL TUBE

Slide the insulated fill tube (15)

onto the water tube inlet (14),

15

making sure that the open side

 

of the fill tube faces up.

14

Go to the back of the refrigerator. On the tube side

of the water tube inlet (14) there is an adhesive backing. Remove the adhesive backing and slide the tube into the hole near the top at the back of the refrigerator. Firmly press on the inlet to secure it to the refrigerator.

1PREPARE FOR INSTALLATION

Remove the upper outlet cover with a flat-blade screwdriver.

If there is already an icemaker bracket (24) installed in the freezer, remove the two screws holding on the cover. Remove and discard the cover. Go to Step 5.

Cover

2REMOVE FILL HOLE PLUG

Remove and discard the large white plug from the rear freezer wall. Pull out the gray insulation plug and remove any debris.

Remove plug

4INSTALL MOUNTING BRACKET

Remove the three small plug buttons on the rear wall of the freezer and replace them with three screws (25) supplied with the icemaker kit. Do

not screw them all the way in. The screws should extend approximately 1/4″ (6 mm) out from the freezer wall.

Install the icemaker bracket (24) by hanging it from the three screws that were just installed. Tighten the three screws securely.

5SET POWER SWITCH TO O (off)

Set the icemaker power switch to O (off). Leave the power switch in the O (off) position until the refrigerator is connected to the water supply to prevent premature operation.

Hole for wire tie

Power

Switch

12

Page 12
Image 12
GE IM-5SS Icemaker Installation Instructions K, Install Fill Tube, Remove Fill Hole Plug, Install Mounting Bracket

IM-5SS specifications

The GE IM-5SS is an innovative, high-performance industrial machine designed to address the demanding needs of the manufacturing and processing industries. Known for its robust build and advanced technologies, the IM-5SS stands out among its competitors.

One of the main features of the GE IM-5SS is its highly efficient electric motor, which provides excellent torque and speed control. This electric motor ensures that the machine operates smoothly, even under heavy loads, making it ideal for continuous operations in industrial settings. The machine's drive system is designed for reliability and longevity, reducing downtime and maintenance costs.

The IM-5SS employs cutting-edge digital control technology, allowing for precise monitoring and adjustment of various operational parameters. This technology integrates seamlessly with existing manufacturing systems, enabling operators to maintain optimal performance levels and improve overall efficiency. The user-friendly interface offers operators versatile control options, including remote operation capabilities, which significantly enhance usability.

Another highlight of the GE IM-5SS is its advanced safety features. The machine is equipped with multiple safety mechanisms, including emergency stop buttons, overload protection, and safety interlocks. These features ensure that the machine operates safely in compliance with industry regulations, protecting both the operators and the equipment.

In terms of versatility, the IM-5SS can be customized to meet specific application requirements. It supports a wide range of materials and processing methods, making it suitable for various industries, including automotive, aerospace, and food processing. Its adaptability is a key asset for businesses looking to optimize their production lines.

The machine's energy efficiency is another significant advantage. Designed with environmentally-friendly technologies, the IM-5SS minimizes energy consumption while maximizing productivity. This focus on sustainability not only helps businesses reduce operational costs but also contributes to their corporate social responsibility goals.

Overall, the GE IM-5SS is an exceptional industrial machine that combines performance, safety, and adaptability. Its advanced features and technologies make it a valuable asset for manufacturers seeking to enhance their operational efficiency and sustainability. With its robust design and modern capabilities, the IM-5SS is a reliable choice for those looking to invest in cutting-edge industrial machinery.