![APPROXIMATE WIDTH REQUIRED FOR](/images/new-backgrounds/52930/529303x1.webp)
Commercial Storage Tanks continued.
DIMENSIONAL INFORMATION (All dimensions shown in English and Metric)
|
|
|
|
|
| WATER CONNECTIONS | APPROXIMATE |
| ||
MODEL |
| A | B | C | D | TOP | FRONT | SHIPPING | WEIGHT |
|
NUMBER | UNITS | OUTLET | SIDE | STD. | ASME |
| ||||
ST80(A) | inches | 2 | 2 | 220 lbs. | 260 lbs. |
| ||||
| mm | 1481 | 621 | 335 | 157 | 51 | 51 | 100 kgs. | 118 kgs. |
|
ST120(A) | inches | 2 | 2 | 300 lbs. | 340 lbs. |
| ||||
| mm | 1505 | 718 | 281 | 103 | 51 | 51 | 136 kgs. | 154 kgs. |
|
ST175(A) | inches | 600 lbs. | 600 lbs. |
| ||||||
| mm | 1708 | 819 | 319 | 141 | 64 | 64 | 272 kgs. | 272 kgs. |
|
NOTE: 1" NPT drain opening on ST175(A). Handhole cleanout on ST175(A) only.
APPROXIMATE WIDTH REQUIRED FOR
MANIFOLDED STORAGE TANKS (Shown in English and Metric)
| MANIFOLD |
| ST80(A) | ST120(A) |
|
|
| UNITS | WITH FACTORY | WITH FACTORY | ST175(A) | ||
| TYPE | MANIFOLD KITS | MANIFOLD KITS | |||
| Duplex | inches | 54 | 58 | 66 |
|
|
| mm | 1372 | 1473 | 1676 |
|
| Triplex | inches | 82 | 87 | 102 |
|
|
| mm | 2083 | 2210 | 2591 |
|
| Quadruplex | inches | 108 | 116 | 137 |
|
|
| mm | 2743 | 2946 | 3480 |
|
|
|
|
|
|
|
|
1" NPT RELIEF VALVE OPENING
HOT OUTLET
OPENING
HOT
3/4" NPT THERMOMETER OPENING
B
TANK INFORMATION (Shown in English and Metric)
|
|
|
| MAXIMUM WORKING | ||
| MODEL | TANK CAPACITY | PRESSURE | |||
| NUMBER | GALLONS | LITERS | STD. | ASME |
|
| ST80(A) | 80 | 303 | 150 PSI | 125 PSI |
|
|
|
|
| 1034 kPa | 862 kPa |
|
| ST120(A) | 115 | 435 | 150 PSI | 160 PSI |
|
|
|
|
| 1034 kPa | 1103 kPa |
|
| ST175(A) | 175 | 662 | 150 PSI | 150 PSI |
|
|
|
|
| 1034 kPa | 1034 kPa | |
|
|
|
|
|
|
|
3/4" NPT AQUASTAT OPENING
A
OPENINGS
FOR
CIRCULATING
LINES
C
D
Recommended Specifications:
Storage Tank(s) shall be model ________________, manufactured by
a storage capacity of ________ gallons. Tank(s) interior shall be double coated with a high temperature porcelain
enamel and furnished with two magnesium anode rods rigidly supported. Tank(s) shall have a working pressure rating of _______ psi, and shall be completely assembled. Tank(s) shall be insulated with 2" of rigid polyurethane
foam insulation. Storage Tank(s) shall be covered by a five year limited warranty against tank leaks.
ADD FOR ASME CONSTRUCTION
Storage Tank(s) shall be constructed in accordance with the requirements of the ASME Boiler Pressure Vessel Code, Section IV Part HLW.
Limited Warranty
This product features a five year limited warranty against tank leaks. Please refer to Commercial Warranty Information brochure
for complete warranty information.
C O M M E R C I A L
W A T E R H E A T E R S
In keeping with its policy of continuous progress and product improvement,
Rheem Water Heating • 101 Bell Road, Montgomery, Alabama
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
P R I N T E D I N U . S . A | 0 1 / 0 7 W P | F O R M N O . R R 1 0 2 C - 3 R ev. 9 |