7
PRECAUTIONS
Notes on handling
•When shipping the unit, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Take care not to give it a shock or shake when carrying.
•Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in contact with this unit for a long time. They will leave marks on the finish.
•The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.
•When the unit is not in use, be sure to remove the disc and turn off the power.
•If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.
Notes on locating
Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc may come off the proper position and cause damage to the unit.
Notes on moisture condensation
Moisture condensation damages the
•Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day.
•Drops of water form on the outside of the glass.
•In the same way, moisture may condense on the optical
Moisture condensation occurs during the following cases.
•When you bring the unit directly from a cold place to a warm place.
•When you use the unit in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.
•In summer, when you use the player in a hot and humid place just after you move the unit from an air conditioned room.
•When you use the player in a humid place.
When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.
Do not use this unit in places which are extremely hot, cold, dusty or humid.
Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by placing it on bedding or carpeting.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Notes on cleaning
Use a soft, dry cloth for cleaning.
•For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinners and benzene, as they may damage the surface of the unit.
•If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.
Inspection and Maintenance
This unit is a high technology, precision device. If the optical
Do not use the
If you use the unit in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the wall outlet and moisture condensation will seldom occur.
On Safety
Do not handle the AC power cord with wet hands and do not put your fingers or objects into the unit.
When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.
When you are not going to use the unit for a long period of time, disconnect the AC power cord.
On Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
