21 | |
|
|
Setting up the player
Find the correct viewing input
1Press the 
button to turn on this product.
2Turn on the TV and switch to the correct
Initial Setting
When you turn on this unit for the first time, or restore all settings to factory defaults, the system will prompt you to perform the initial setup.
1Follow the
OSD Language
For more information, please see the “Language Setting” section on page 29.
Resolution
For more information, please see the “Resolution” section on page 31.
Aspect ratio
For more information, please see “TV Screen” section on page 31.
2After selecting the settings, press OK to confirm and exit.
SETTING menu
Press the SETTING button on the remote control to display the setup screen.
For more information, please see the “Customizing” on page 26.
ePortal Home
Press the HOME button on the remote control to display the ePortal Home screen when there is no disc playing or the player is in Stop mode.
For more information, please see the “Navigating the ePortal Menu” on page 33.
Basic playback
When you wish to view a disc, turn the TV on and select the video input connected to the
1Press the 
button on the front panel or the remote control; your
2Turn the TV on and then select the input setting on the TV that matches the connection method you used to connect your player.
3Press the 
OPEN/CLOSE button on the remote control to open the disc tray.
4Place a disc on the disc tray with the label facing up, and then press the 
OPEN/CLOSE button to close the disc tray.
The disc loading time depends on the types of disc you are loading.
5After loading a disc, the playback starts automatically.
6If a
7To eject the disc, press the 
OPEN/CLOSE button.
Pause playback
1Press the 
button to pause playback. The sound will be muted.
2Press the 
button to resume the playback.
Still Off
1Press the 
button to continue to playback when in still off mode.
