EAN800A/EAN800AW
Note:
1.It is impossible to access the SD memory card in the process of formatting.
2.All data saved on the SD memory card will be deleted when the SD memory card is formatted.
3.Do not turn the power of the camera off in the process of formatting.
4.8.4Maintenance
Maintenance Server
Reboot: The unit is rebooted without changing any of the settings. Use this method by pressing Reboot button if the unit is not behaving as expected.
Restore: The unit is restarted and most current settings are reset to the factory default values by pressing Restore button. The only settings saved are:
•IP setting
•DDNS setting
Default: The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be
40
