EAN800A/EAN800AW
4.7 EVENT
An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed.
This table describes how to setup action types and event type.
Event Type |
| Manual | Motion | Schedule |
|
Action Type | Alarm Input | Trigger | Detection | Recording | |
Trigger Alarm | x | x | x |
|
|
Send Mail notification | x | x | x |
|
|
Upload to FTP** | x | x | x |
| x |
Record to SD Card | x | x | x | x | x |
Record to PC* | x | x | x | x | x |
Network Alarm | x | x | x |
|
|
x | x | x |
|
|
Note: 1. * Record to PC only works when PC and IP camera are connected.
2.**Either Upload to FTP or Record to Network Storage can be selected to record event video to remote site.
3.Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to upload images.
4.7.1Event
The settings relating to event occurrences such as settings for the event occurrence, motion, alarm and time mask can be configured on this page.
The "Event " page has 4 tabs: [Event] tab, the [Motion] tab, the [Alarm] tab and the [Time Mask] tab.
29
