Xerox 6500 manual Maintenance Mode Menu, Description

		Control Panel Menus
Item	Description
Odd Page 2-Sided	If the optional duplex unit is installed, this item tells the printer how to
(Phaser 6500DN printer	handle the last odd page in a 2-sided print job.
configuration only)	•	1-sided
	•	2-sided
Power On Wizard	Resets the Power On Wizard. The first time the printer is turned on, a special
	menu appears on the printer control panel. Use it to configure initial
	settings such as language, default paper size, and network settings. This
	setting enables the administrator to reset the Power On Wizard so that the
	special menu appears when the printer is turned on.

Maintenance Mode Menu

Use this menu to configure color registration and to reset defaults.

Item	Description
F/W Version	Displays the current firmware version installed in the printer.
Auto Regi Adj.	Auto Registration Adjust. When On (the default), the color registration is
	adjusted automatically.
Adjust Color Regi.	Adjust Color Registration. Used to correct the color registration between
	colors. For details, see Color Registration on page 136.
	• Auto Adjust: Use to force an automatic color registration correction.
	• Color Regi Chart: Prints the color registration chart used to check for
	correct color registration.
	• Enter Number: Use to select and correct color registration numbers.
	• Fast Scan (1): For setting horizontal color registration, or Slow Scan (2)
	for setting vertical color registration.
Clear Developer	Resolves print-quality defects associated with charge problems after
	high-coverage print jobs.
Toner Refresh	Resolves print-quality defects associated with charge problems after
	low-coverage jobs.
IU Refresh (Imaging Unit	Helps improve imaging unit operation by performing a density and color
Refresh)	curve calibration.
Init Print Meter	Initialize Print Meter. Resets the Print Meter.
Initialize NVM	Resets the settings in the nonvolatile memory (NVM), except for the
	network settings, to their defaults. NVM is memory that stores the printer
	settings even after the power is turned off. After selecting this option and
	restarting the printer, all the menu settings are reset to their default values.
	Note:
	• You cannot execute the Initialize NVM setting during printing.
	• After changing this setting, turn off the printer and then turn it on
	again to activate the change.

Phaser 6500 Color Laser Printer	97
User Guide