Configuring Communication Connections
4.4Configuring ISO Transport Connections
Introduction
When you create a connection in the New dialog, you specify the connection type and, as far as possible, the connection partner.
When necessary, you can adapt other connection partners that are set as default when you create a new connection as described below.
Opening the Dialog
To call the dialog for special connection properties, follow the steps outlined below:
1.Select the required connection in the connection table.
2.Select the menu option Edit " Object Properties
Result: The “Properties ISO Transport Connection” dialog appears.
Tabs
The following tabs are available for ISO transport connections:
SGeneral
Displays parameters that identify the connection.
SAddresses
Displays the local and remote address information.
SDynamics
Displays the relevant timers and counters.
SOptions
Here, you can decide whether or not you want to use the connection for one of the access types FETCH or WRITE.
SOverview
This is an overview of all the configured ISO transport connections of the selected station with their parameters and the status of the connection.
SStatus Information
This tab displays the current status information for the connection (valid at the time the dialog is opened). This information corresponds to the NCM Diagnostics display and is only available when the station can be reached online.
SIMATIC NET NCM S7 for Industrial Ethernet | 103 |
Release 6/2003 |